Automatic Swimming Poor Cleaner Vacuum-Generic Climb Wall Pool Sweeper - Blue

 Package Includes:
1 x Swimming Pool Cleaner
10 x Durable Hoses Sets
1 x Regulator Valve
1 x Manual
Problem: Cleaner is sluggish or has stopped operating.
Solution:
● Check if the pump is ON and / or primed.
● Check Cleaner head for blockages.
● Clean and empty pump basket and empty skimmer/weir basket.
● Ensure the filtration system is thoroughly cleaned. Clean sand/cartridge filters on your pool
pump as per manufacturers specifications.
● Inspect the regulator valve and flush away any debris build-up.
● Check the Mat for wear.
● Make sure the curved tips of the Mat are facing upwards.
● Ensure that the skimmer/weir vacuum lid is fitted correctly and check for cracks.
● Check the hose for blockage.
● Check the hose for leaks by lifting each section above water while pump is running.
● Consult a pool shop in your area.
Problem: Cleaner travels in a repetitive pattern.
Solution:
● Adjust return jets downwards.
● Verify proper hose length.
● Ensure cleaner sits flush with the pool floor. Adjust the position of hose weight if necessary.
● This should be done at the deepest part of the pool.
● Remove or add one hose section.
● Inspect the Regulator Valve and flush away any debris build-up.
● Check that the hose sections are straight; if not, lay hose in a straight line in the sun to relax
the memory.
● Twist each hose section a half-turn at each connection point.
● Ensure the wheel at the top of the Cleaner head is rotating freely.